Excl. VATInc. VAT

How to reinstall the RG350M firmware

If your RG350M is not booting or you are upgrading to a larger Micro SD Card you will need to reinstall the firmware. You can follow this guide for how to reinstall the original firmware.

IMPORTANT: Do NOT install RG350 firmware on a RG350M, it may not work. While it will not damage the device, you will need to reinstall the correct firmware below.

This guide is also applicable to the RG350P, as the design of the devices is the same. However, you will need different firmware (see below).

Additionally, you can also use the RG350P firmware with the original RG350.

You will need:

Original RG350M firmware: You can download it from here. Once downloaded, extract the .img file with software such as 7zip, WinRAR, Zip etc.

OR

Original RG350P firmware: Here.

Disk image writing software: You can use any software such as Win32 DiskImager or Etcher for example. In this guide we are using Win32DiskImager

Win32 Disk Imager

 

Removing the Micro SD Card

There may be a security sticker covering the Micro SD Card slot. You can use your fingernail or similar to break the seal either side of the Micro SD Card as shown in the below photo.

Gently press the Micro SD card and it should click and pop up. You can now remove the card.

 

Formatting

We’d advise formatting your media first before loading firmware onto it to minimize the chance of errors occurring.

To format it, insert the media into your system, then right click it in File Explorer. Select “Format” from the context menu.

Make sure the card is formatted as whatever is required – this will typically be NTFS or FAT32, then click format.

Now your media clean and ready to be used.

Writing the firmware to the microSD card

It is possible to quickly duplicate a storage device’s contents through the method of “disc imaging”. With the image file (.img) you have downloaded, download imaging software. We highly suggest Win32DiskImager, as it is lightweight, straightforward and easy to use.

Note that as of writing, Win32 Disk Imager does not play nice with services that persistently scan for drives, such as Google Backup, or Linux File Systems for Windows by Paragon Software. If Disk Imager will not start, exit these programs/disable these services, then try it again.

This is what the interface should look like.

The main aspects you should be concerned with are:

Device: The partition that you are going to write to/read from. Note that Win32DiskImager will overwrite/copy the ENTIRE device that the partition is on. Not just the selected partition.

Image File: This is where you select the image file you’ve downloaded/extracted. If you type in a filename that does not exist, a file will be created automatically you “read” the device.

Write: Start copying the image file’s contents to the device.

Read: Copy the device to an image file. If no image file exists, will create one with the chosen name. Use this to make backups.

 

So to summarize: Select the SD card as the “device”, select the image file downloaded prior, then click “Write”.

Do not remove the SD card or close the application during this process, otherwise you will need to restart the process.

Once finished, you can insert it back into the TF1/Internal card slot.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Share on reddit
Reddit
Share on tumblr
Tumblr

Related Products

Related Posts

Random Posts

We will be happy to hear your thoughts

Leave a reply

Only The Best Product Range

ZHIYUN Crane Plus

PLUS+ MotionMemory
Using the new MotionMemory feature with Crane Plus allows you to setup advanced camera movements and save them so Crane Plus will remember them for the future. It will even remember all of your timelapse settings like the interval, number of shots, duration, and more! Now, with a simple click of a button you can repeat the same moving shots over and over again. It’s like having your very own camera assistant everywhere you go!
Crane Plus adds a newly designed POV (Point of View) mode that allows for additional camera movement by providing up to 45 degrees of synchronous motion on the roll axis, What this means is that rather than Crane Plus keeping the camera level when you roll left or right, POV mode will move with you and roll your camera left or right, up to 45 degrees. Even simpler, when you move, your camera moves with you. The addition of POV mode, along with the 3 other modes on Crane Plus give you the level of control and freedom you need to capture almost any shot possible. The only limitation is your imagination
PLUS+ Intelligent Object Tracking
Crane Plus supports object-tracking via phone app control (specific operation methods seen in the official tutorial:). Draw a box around the object you want to track on the phone screen, then your Crane Plus can easily track the moving object and shoot excellent scenes free hands.
PLUS+ A Massive Capable Payload of 2.5kg
Crane Plus is pushing the limits even further than before! Using our cutting-edge, 6th generation Instune Algorithm System to power the motors, Crane Plus can handle a massive weight capacity of up to 2.5kg (5.51lbs). Whether you’re using mirrorless cameras with kit lenses or your using professional grade DSLRs with heavier lenses, Crane Plus can now handle a significantly wider range of camera and lens combinations
PLUS+ NightLapse
In the past, gorgeous timelapse photography is only limited to daytime shooting. Now with Crane Plus arrives the NightLapse feature: A powerful new tool for creating gorgeous, long-exposure timelapses that add in a new dimension of motion and depth. Using Crane Plus with NightLapse, you can capture stunning star trails, moving nighttime traffic, capture the passage of time over beautiful nighttime landscapes, and all with the stunning motion and stability that only Crane Plus can provide
PLUS+ All-in-one Design
Crane Plus comes with a camera control cable that can realize synchronous operation on both your camera and stabilizer like taking a photo or zooming. Combined with a dedicated phone APP – ZY Play, Crane Plus helps to realize various advanced shootings, like motion timelapse and panoramas, just at your fingertips

DroiX
Logo
Compare items
  • Total (0)
Compare
0